Critical Process Control Model CPM-8

The CompuDAS® Model CPM-8 is a low cost, unit for process monitoring that is equipped with eight independent analog in- puts. Inputs may be a combination of thermocouples, RTD’s, pressure transducers or almost any voltage or current (4-20ma) based sensors.

The CPM-8 system is a wall mounted unit that includes a Digital Display, a Menu driven Keypad and one Single Board Computer with a built-in solid state Hard Drive. The CPM-8 provides high-speed, low cost communication utilizing our friendly Windows Based Software, and Ethernet connectivity which allows multiple PC’s to view and access data simultaneously.

Features:

• Digital Process Display
• Per Channel Engineering Unit Scaling and Calibration.
• Remote Connectivity
• Windows based Interface that connects via Ethernet
• Paperless Recording – Excel Compatible Files that are “tamper evident”
• Solid State Hard Drive
• User selectable Auto Start/Stop Logging with adjustable parameters
• Two Solid State AC Relay alarm outputs
• Alarm Input/output programmable for each channel
• Direct Thermocouple Connectivity
• Display is selectable by channel
• AMS-2750 and BAC-5621 compliant

Data Storage Capabilities

• Standard 3 million on-board readings
• Easily Expandable memory in groups of 3 million readings
• Recording intervals scalable from 10 sec- onds to one hour
• Excel compatible files are saved to on- board hard drive
• Each file is dated and time stamped for each data logging session Programmable Input Ranges and A/D Converter Resolution
• 16 bit resolution stable to 0.02 %/year
• +/- 10 volts
•+/-1volt
• +/- 100 millivolts
• +/- 10 millivolts
• Input common mode range from -10V to +10V Internal Excitation Supply
• +5 and +12volts nominal (+/- 5%) to 200 ma
• Temperature stability 2 mV per degree C typical

Graphical User Interface Features

• Process monitoring setup
• Real-time viewing of current process inputs in- cluding minimums and maximums
• Real-time graphing of 6 process inputs (printable)
• Start/Stop and limit reset control
• Data transfer to operator PC’s or user network
• Display selectable by channel and / or card Operator PC Requirements
• Windows 10 and backwards compatible
• Selectable engineering units Physical Characteristics
• Wall mount unit is 12”wide, 16” tall and 6” deep.
• 20 digit Liquid Crystal display with keypad driven menu

Support and training

Extended factory support and training is available via telephone and/or the internet. Our trained engineers and representatives are available to help with individual installations and applications to reduce critical down-time.

CPM-8 Images and Screenshots

More Information

Contact us for more information or get the FREE CompuDAS Full Technical Factsheet to your inbox – just enter your email below.  (Yes, we’ll send you the occasional email about updates or our new products, but you can always unsubscribe.)

Critical Process Control CPM-8 Applications